Medictur.ru
Tech-Med LLC is presented in the original supplier overview as a company providing individual items and complete packages of medical furniture. The article covers equipment for children’s healthcare facilities, maternity units, surgical departments, operating theatres, outpatient clinics and inpatient wards.
The original article identifies Tech-Med as an official distributor of the Italian manufacturer Vernipoll s.r.l. It describes support for hospital tenders, national healthcare programmes and private furnishing projects.
Materials, design and the product range
Medical furniture is an essential part of a healthcare facility, and its materials and construction affect how it can be used and cleaned. The supplier overview emphasises materials described as environmentally friendly and resistant to detergents and disinfectants, together with designs developed for different clinical settings.
The supplier overview presents Vernipoll as a prominent brand in the Russian market, emphasising quality, contemporary design and competitive pricing. The following sections describe the furniture range covered in that article.
Medical trolleys and examination couches
The trolley range includes general distribution trolleys, medication trolleys and emergency trolleys. Emergency versions are described with accessories and fittings for the instruments and equipment needed when providing urgent care. Trolley bodies and panels use engineering polymers and laminate-faced board, with surfaces described as resistant to scratching.
Examination couches support patient assessment and a range of therapeutic procedures. The standard couches described have two sections, with a gas-spring-adjusted backrest. The range also includes couches for gynaecological examinations and cosmetic procedures.
Gynaecological couches have three sections, with continuously adjustable back and leg sections. Their fittings include two removable leg supports that can be positioned in different directions and a pull-out stainless-steel tray. Height-adjustable couches are described for both medical and cosmetic work: the height is adjusted electrically using a hand control, castors allow the couch to be moved, and a gas spring adjusts the backrest. A variety of upholstery colours is mentioned.
Ward furniture and patient recliners
Ward cabinets and tables are described as using engineering polymers and laminate. The original overview highlights their bright appearance, practical layouts and warm colours. Different combinations of features allow the furniture to be configured around the requirements of patients and staff.
Patient recliners are described for healthcare facilities, residential care settings and geriatric centres. Polyurethane padding is intended to support comfort and distribute pressure. The source’s claim that it prevents muscle compression should be understood as a design claim rather than a guaranteed clinical effect.
The recliners have padded, lowering armrests and two swivelling, folding leg supports. Their seamless imitation-leather upholstery is described as washable, flame-resistant and compatible with disinfectants. Some models use a gas spring to recline the backrest. Other configurations include castors, an infusion pole or arm supports for blood sampling.
Blood donation and sampling chairs
The source describes a three-section Vernipoll chair for blood donation, sampling and transfusion-related procedures. It has adjustable height and a hand control. The backrest can be raised to an upright position, with its angle adjusted using a gas spring, and the arm supports can be repositioned in different directions.
The chair also provides a Trendelenburg position. Its imitation-leather upholstery is described as resistant to disinfectants. Accessories mentioned include an infusion pole, an instrument tray and a holder for disposable examination paper.
Patient transport trolleys
Patient transport trolleys are described with two-section platforms, either at a fixed height or with height adjustment. Depending on the model, they provide Trendelenburg and reverse Trendelenburg positioning, a gas-spring-adjusted backrest and a platform that is radiolucent along its full length.
Other features include side rails, accessory sockets and a base cover incorporating storage for a gas cylinder and the patient’s belongings. The article describes use for moving patients within a hospital and in areas outside the building.
Bedside cabinets
The bedside cabinets described have sheet-steel bodies finished with epoxy powder coating, intended to withstand regular cleaning and disinfection. Configurations include cabinets accessible from one or both sides and versions with a separate table.
Removable internal shelves, doors with a 110-degree opening angle and an external holder for two bottles are among the features listed. The bottle holder is positioned on the patient’s side for access.
Intensive care beds and mattresses
The article places particular emphasis on intensive care beds designed to support both patient comfort and staff access during rehabilitation and emergency care. The models described generally have four sections and adjustable height, with Trendelenburg and reverse Trendelenburg positioning, a radiolucent platform and a rapid CPR backrest release.
Electrical functions are operated through controls for staff and patients. Accessory holders allow equipment to be arranged around the bed while maintaining access to the patient. Removable ABS platform sections facilitate cleaning and disinfection, while removable head and foot boards are described in engineering polymers or plastic laminate, with different colour options.
The source also describes polyurethane mattresses with hygienic covers, promoted as helping to reduce pressure on the body. A mattress does not by itself guarantee prevention of pressure ulcers. The covers are described as waterproof and resistant to detergents and disinfectants; the article specifies heat treatment at 100°C. That temperature should only be used where the particular mattress cover’s care instructions permit it.
Adjustable beds for general clinical use
The wider bed range is described for inpatient and outpatient facilities of different specialties. It includes single-platform beds and two-, three- and four-section beds, with removable platform sections on some models.
Section adjustment can use gas springs, electromechanical drives, toothed racks or screw handles. Bed height is described as adjustable by a pump mechanism or an electric drive, depending on the model. Some beds can be placed in Trendelenburg or reverse Trendelenburg positions to support care procedures.
The accessories listed include side rails, infusion poles, a patient lifting pole, radiolucent platform options, a platform extension and bedpan holders.
Stainless-steel furniture for surgical departments
The source presents stainless-steel furniture as a durable option for operating theatres and surgical departments, where frequent cleaning and disinfection are required. The range described includes cabinets for surgical instruments and medicines, surgical scrub sinks, storage cabinets for sterile items and endoscopes, specialist trolleys and modular operating-theatre furniture.
Vernipoll’s stainless-steel furniture catalogue describes AISI 304 stainless steel with a Scotch-Brite finish and welded joints intended to facilitate cleaning.
Scrub sinks and instrument cabinets
Surgical scrub sinks are described in single-, double- and triple-station versions. The integral basin is shaped to limit splashing, with removable panels above and below it. Water delivery can be controlled using a foot pedal, an elbow-operated lever or a sensor.
The instrument and medication cabinets described use hollow-panel construction for solid doors and fronts, with a dust seal around the perimeter. Glazed doors use tempered glass in an anodised aluminium frame with a 110-degree opening angle, or a stainless-steel door structure with a central glazed panel. Drawers are removable and run on telescopic slides; internal shelves are height-adjustable.
Storage cabinets for instruments and endoscopes
The original overview describes cabinets for surgical instruments and endoscopes with ultraviolet lamps, programmable timers and a lamp shut-off function. It presents these as storage units intended to help maintain the condition of previously processed instruments. Endoscope versions have pull-out supports with dedicated plastic holders.
Storage must follow the device’s validated reprocessing instructions. A cabinet with a UV lamp does not replace the required cleaning, disinfection or sterilisation of an instrument. CDC guidance on healthcare equipment describes endoscope storage as a step after reprocessing and drying, with protection against recontamination.
Instrument tables and specialist trolleys
Stainless-steel instrument tables and trolleys are described for operating theatres, surgical departments and other clinical settings. Their layouts are intended to suit different working requirements, with durable surfaces compatible with the specified disinfectants.
A separate emergency trolley range includes fittings and accessories for resuscitation equipment. Anaesthetic trolleys have drawers on telescopic slides, medication trays and rails for hanging instruments. Operating-theatre trolleys can be fitted with a range of baskets for medical supplies and surgical instruments, helping staff organise the working area.
Maternity beds and birthing chairs
The source describes maternity beds and birthing chairs designed to offer space, adjustable positions and accessories that support movement during labour and birth. Their purpose is to help women find suitable positions while allowing staff to provide care.
Two maternity-bed configurations are listed: one with hydraulically adjusted height and another with electrically adjusted height. Both are described with electric adjustment of the back and thigh sections using a hand control.
The upholstery of the maternity beds and birthing chairs is described as heat-welded imitation leather. This construction produces cushions without stitched seams, helping limit liquid penetration and making surfaces easier to clean. The upholstery is described as resistant to moisture, bodily fluids, detergents and disinfectants.
Children’s medical furniture
The paediatric range described includes changing tables, newborn cots and children’s hospital beds. The original article highlights rounded edges, a pleasant colour palette and materials described as environmentally friendly and resistant to detergents and disinfectants. These features are intended to create a practical, welcoming environment in children’s healthcare facilities.
Original source: Tech-Med medical furniture supplier overview.
